BIOS Information Displays the auto-detected BIOS information.

This product has been designed to enable proper reuse of parts and recycling.

If possible, disconnect all power cables from the existing system before you add a device.

ASUS websites The ASUS website provides updated information on ASUS hardware and software products.

Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

ASUS will shoulder the cost of repair only if the damage is shipmenttransit-related.

ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA775 socket.

P5G41-M LX Motherboard Qualified Vendors Lists (QVL) DDR2-667 MHz capability DIMM support Size Vendor Part No.

B: Supports one pair of modules inserted into both the blue slots as one pair of dual-channel memory configuration.

The following sub-sections describe the slots and the expansion cards that they support.

Unplug the power cord before adding or removing expansion cards.

Failure to do so may cause you physical injury and damage motherboard components.

For system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature.

Shut down and reboot the system, then the BIOS automatically resets parameter settings to default values.

USBPW1-4 5VSB (Default) USBPW5-8 P5G41-M LX 5VSB (Default) P5G41-M LX USB Device Wake Up Connectors 1.7.1 Rear panel connectors 1-10 Chapter 1: Product introduction.

This 15-pin port is for a VGA monitor or other VGA-compatible devices.

If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at comPowerSupplyCalculatorPSCalculator.aspxSLanguageen-us for details.

CPU and chassis fan connectors (4-pin CPUFAN, 3-pin CHAFAN) The fan connectors support cooling fans of 350 mA740 mA (8.88 W max.) or a total of.

P5G41-M LX IDE connector If any device jumper is set as Cable-Select, ensure that all other device jumpers have the same setting.

Serial ATA connectors (7-pin SATA1-4) These connectors are for the Serial ATA signal cables for Serial ATA 3Gbs hard disk drives and optical disk drives.

If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to HD Audio.

The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

You can restore a corrupted BIOS file using the motherboard support DVD or a removable device that contains the updated BIOS file.

IDE Detect Time Out (Sec) 35 Selects the time out value for detecting ATAATAPI devices.

Configuration options: 0 5 10 15 20 25 30 35 ASUS P5G41-M LX.

P5G41T M Lx